Eve Room - Review 2022

The Eve Room ($99.95), one of several components that make up the company's ecosystem of HomeKit-enabled smart habitation devices, is a pricey little gadget packed with a Bluetooth radio, sensors for air quality, temperature, and humidity, and an E Ink monochrome display. It's piece of cake to install, supports Siri vox commands, and performs as advertised, but it doesn't work with Amazon Alexa or Google Assistant voice commands, or Android devices.

Design and Features

At 2.ane past ii.1 by 0.5 inches (HWD), the Eve Room is small-scale enough to fit in the palm of your hand, and has a sleek black-and-silver finish. The front face holds a small ane.54-inch East Ink display that, despite its diminutive size, is easy to read from across the room. Pointer buttons on the left and right bezels permit you toggle between four screen layouts: a large temperature readout with smaller air quality and humidity readouts, a big humidity readout with smaller air quality and temperature readouts, a large air quality readout with smaller temperature and humidity readouts, or a screen where all readings are the same size.

Air quality is displayed every bit stars, with v illuminated stars indicating excellent air quality. Stars will go dark as the air quality becomes less stable. Temperature is displayed every bit a number in either Fahrenheit or Celsius, and humidity is displayed as a pct.

The Eve Room has sensors that measure VOC (Volatile Organic Components) levels, room temperature, and room humidity levels. Information technology uses a rechargeable internal battery that will ability the device for up to six weeks, or you can keep it plugged into a USB source using the included charging cablevision.

Equally with all Eve dwelling house devices, the Room only works with Apple'south HomeKit, which means it only works on iOS devices. It supports Siri voice commands, but not Google Banana or Amazon Alexa voice commands, and information technology doesn't piece of work with IFTTT applets. It has a Bluetooth radio that connects to your iPhone or iPad, only lacks Wi-Fi. If yous want to admission the device remotely, you'll have to utilise an Apple TV, a HomePod, or an iPad configured as a hub.

The Room uses the same mobile app as other Eve home devices. When you lot open up the app yous see a list of all of your HomeKit rooms. Tap the room where the device is installed (mine was in the Den) and tap the device name. This opens a screen with Air Quality, Temperature, and Humidity tabs. Each tab shows the electric current reading. Tap whatsoever tab to see an hourly chart of measurements, and tap the blueish circle to run across an expanded chart that lets you view hourly, daily, weekly, or monthly readings. Tap the Measurements tab to run across a detailed list of measurements with time stamps.

At the bottom of the screen are five buttons. The At a Glance push takes you to a screen where you can see and access your near-used devices, and the Rooms button takes yous back to the screen with all of your HomeKit rooms. The Types push button opens a screen with a list of all devices by category, and the Scenes button opens a screen where y'all can execute automation Scenes, configure Timers, and create automation Rules. For instance, you tin can plug a dehumidifier into an iDevices smart switch and have it plow on when the Room reports a specific humidity level, or have a Philips Hue low-cal plough a certain color when the air quality drops to a dangerous level. You lot have to have i of the higher up-mentioned hub configurations to use the Timer and Rules features, still.

Lastly, the Settings button takes you to a screen that displays a list of all HomeKit devices by room assignment. Here yous tin exercise things like modify the name and icon of each device, and add new devices to your dwelling house.

Installation and Performance

To install the Eve Room, simply download the app, go to Settings, and tap the plus button in the upper-right corner. In my testing, the device was recognized immediately. I tapped the Room icon and followed the on-screen instructions to scan the HomeKit lawmaking located on the bottom edge of the device. After x seconds the device was paired and I was instructed to select a room and give each sensor a name. The instructions also directed me to place the Room device upright, get out information technology connected to a power source for two hours for a total charge, and look a full 24-hour interval for information technology to calibrate itself. I updated the firmware and was done.

The Room sensors worked well. Thankfully, my home air quality measurement garnered five stars, meaning it is free and clear of VOC elements. Still, when I put the device in my garage, which is where I keep lawnmowers, spare gas cans, paint thinner, and other solvents, I immediately saw an increase in the VOC graph in the app, and one of the five stars displayed by the Room device was dimmer than the other four. I then placed information technology side by side to an open gas can and within x minutes the stars in the app had turned amber and merely three of the stars on the device were illuminated, indicating a moderate presence of VOCs.

The temperature and humidity sensors also worked flawlessly, coming within i degree of the temperature and two percentage points of the humidity readings displayed on my Honeywell thermostat. Siri voice commands request for temperature, humidity, and air quality readings were answered promptly and accurately.

Conclusions

If y'all're using Apple's HomeKit platform to control your smart home devices, the Eve Room is a solid, albeit pricey, choice for an indoor environmental monitor. It's a snap to install and uses authentic sensors to give you real-time air quality, room temperature, and humidity readings. The minor Eastward Ink brandish is piece of cake to read and the mobile app lets you track changes in your environs with graphical charts. Yous tin create rules to have it trigger other HomeKit devices, but yous'll have to use a Wi-Fi span such as an Apple Goggle box or HomePod. Android users are out of luck as this device, and other Eve Habitation devices, will only work with HomeKit. If the lack of Android and Alexa support is a deal breaker, consider the Canary All-In-1 Home Security Device. It costs a bit more, but information technology also monitors air quality, temperature, and humidity, and it has a 1080p camera, a movement sensor, and a Wi-Fi radio.

Source: https://sea.pcmag.com/elgato-eve-room/29947/eve-room

Posted by: brunsonthadders1937.blogspot.com

Share this post